Peabody MCU #2 Mobile Containment Unit - (1) 12 Gallon and (2) 6 Gallon Tanks

The Peabody MCU #2 Mobile Containment Unit - (1) 12 Gallon and (2) 6 Gallon Tanks keeps two, three or four different chemicals in one multi-compartment dual containment tank, with isolated containment chambers so a leak in one never reaches the other. It stands on roughly a 25 inch square of floor and is 27 inches tall, or 47 inches with the optional overhead PumpDeck.

This MCU #2 Mobile Containment Unit - (1) 12 Gallon and (2) 6 Gallon Tanks measures 25" L x 25" W x 25" H.

MATERIAL OPTIONS

• With PumpDeck / Natural — Part No.: 01-35392
• Without PumpDeck / Natural — Part No.: 01-35386
• With PumpDeck / Blue — Part No.: 01-35389
• Without PumpDeck / Blue — Part No.: 01-31896

FEATURES

• Individual 6 and 12 gallon primary tanks in isolated secondary containment chambers
• Configurable as two 12 gallon, one 12 plus two 6, or four 6 gallon tanks
• About a 25 inch square footprint, 27 inches tall, 47 inches with the PumpDeck
• Optional overhead PumpDeck holds up to four metering pumps and drains drips back to the right tank
• Optional leak detection for the shelf and the interstitial space, with strobe and audible alarm
• Tanks can be mixed blue and natural so each chemical is identified at a glance

MATERIAL SELECTION GUIDANCE

Linear polyethylene (LPE) is typically selected for general chemical and water storage; cross-linked polyethylene (XLPE) where greater impact and stress-crack resistance is preferred; polypropylene (PPL) and polyvinylidene fluoride (PVDF) for resin-specific chemistries. Choose based on chemical compatibility first: suitability depends on your specific chemical, its concentration and its temperature, and is the buyer's responsibility to verify before ordering. The specific gravity rating states the heaviest liquid the wall is designed to hold — a 1.5 wall up to about 12.5 lb per gallon, a 1.9 wall up to about 16 lb per gallon.

These are vented, atmospheric storage tanks. Not for pressurized or vacuum service.

CHEMICAL COMPATIBILITY RESOURCES

• Peabody Chemical Resistance Chart (PDF)
• Polyethylene Chemical Resistance Chart (PDF)
• Polypropylene Chemical Resistance Chart (PDF)
• Chemical Compatibility Tool

Compatibility data is published by resin and chemical suppliers as general guidance only. Contact us with your chemical, concentration and temperature before you order.

TECHNICAL DRAWINGS & GUIDES

Technical Drawing: View Technical Drawing

KEY SPECIFICATIONS

• Product Type: MCU #2 Mobile Containment Unit - (1) 12 Gallon and (2) 6 Gallon Tanks
• Tank Shape: Square
• Pressurized Use: No
• Dimensions: 25" L x 25" W x 25" H
• Color: Natural, Blue
• Manufacturer: Peabody Engineering
• Manufacturer Part Number: 01-35392 / 01-35386 / 01-35389 / 01-31896

SHIPPING INFORMATION

• Freight Class: 250
• Locations: Liberty, South Carolina
• Zip Codes: 29657

WARRANTY TERMS

Peabody Engineering warrants this product against defects in material and workmanship for 36 months from the date of shipment, when it is installed, used and maintained as intended. Chemical compatibility, service temperature and liquid specific gravity are the buyer's responsibility: damage from an incompatible chemical, from service above the rated temperature, or from a liquid heavier than the wall rating is not covered.

Custom and Made to Order products are not returnable