90 Gallon Peabody Gemini Dual Containment Cylindrical Tank

Product Description

The 90 gallon Peabody Gemini Dual Containment Cylindrical Tank is a tank inside a tank: if the primary wall ever fails, the chemical stays in the secondary shell instead of on your floor. Both walls are molded polyethylene, so the assembly shrugs off the acids, caustics and hypochlorite that attack stainless steel.

Measuring 34" diameter x 41.25" high, this Gemini Dual Containment Cylindrical Tank holds 90 gallons.

MATERIAL OPTIONS

• Linear Polyethylene (LPE) 1.5 SG — Natural — Part No.: 01-30295 (NSF/ANSI 61 certified resin)
• Linear Polyethylene (LPE) 1.5 SG — Blue — Part No.: 01-30294 (NSF/ANSI 61 certified resin)
• Linear Polyethylene (LPE) 1.9 SG — Natural — Part No.: 01-30297 (NSF/ANSI 61 certified resin)
• Linear Polyethylene (LPE) 1.9 SG — Blue — Part No.: 01-30296 (NSF/ANSI 61 certified resin)
• Cross-Linked Polyethylene (XLPE) 1.5 SG — Natural — Part No.: 01-30298 (NSF/ANSI 61 certified resin)
• Cross-Linked Polyethylene (XLPE) 1.9 SG — Natural — Part No.: 01-30299 (NSF/ANSI 61 certified resin)

Value-Pak packages are offered with the natural-color Linear Polyethylene (LPE) 1.5 SG and 1.9 SG tanks.

WHAT EACH PACKAGE INCLUDES

Silver — Part No.: 293-34330

• Plastic fittings in your choice of PVC or polypropylene
• Stainless steel float level gauge
• Pump Pup pedestal that raises your pump for an easy suction connection (pump not included)
• 1" quick-connect fill with a male cam adapter, dust cap and lanyard
• Gemini pump suction tube with foot valve
• 3P document protector for SDS and safety sheets on the tank side
• CAD submittal drawings
• Plastic wrap and palletizing for transit

Gold — Part No.: 293-34338

Everything in Silver except the stainless steel float level gauge, plus:

• 1" double-wall bulkhead bottom drain fitting, installed
• 1" HDPE half coupling
• Mini inverse level indicator with a 2" wide calibration board
• Non-code FiberRing restraint system

Platinum — Part No.: 293-34346

Everything in Gold except the 1" double-wall bulkhead bottom drain fitting, plus:

• 1" double-wall welded bottom drain fitting
• Interstitial leak detection sensor (alarm box sold separately)
• Submersible level sensor with display and 4-20 mA signal output, 24 VDC powered

FEATURES

• Tank-in-a-tank dual wall construction meets EPA 40 CFR secondary containment
• Secondary tank leak detection port for an optional leak alarm
• Integral pump mounting platform on the dome, rated for pumps up to 240 lb
• Pump pick-up tube port seals the contents from the outside air once installed
• Recessed mouse door on most models for an optional dual wall bulkhead fitting
• LPE tanks are NSF/ANSI/CAN 61 certified; XLPE is certified from 40 gallons up

MATERIAL SELECTION GUIDANCE

Linear polyethylene (LPE) is typically selected for general chemical and water storage; cross-linked polyethylene (XLPE) where greater impact and stress-crack resistance is preferred; polypropylene (PP) and polyvinylidene fluoride (PVDF) for resin-specific chemistries. Choose based on chemical compatibility first: suitability depends on your specific chemical, its concentration and its temperature, and is the buyer's responsibility to verify before ordering. The specific gravity rating states the heaviest liquid the wall is designed to hold — a 1.5 wall up to about 12.5 lb per gallon, a 1.9 wall up to about 16 lb per gallon.

These are vented, atmospheric storage tanks. Not for pressurized or vacuum service.

CHEMICAL COMPATIBILITY RESOURCES

• Peabody Chemical Resistance Chart (PDF)
• Polyethylene Chemical Resistance Chart (PDF)
• Polypropylene Chemical Resistance Chart (PDF)
• Chemical Compatibility Tool

Compatibility data is published by resin and chemical suppliers as general guidance only. Contact us with your chemical, concentration and temperature before you order.