55 Gallon Peabody ProChem Open Top Chemical Tank (Lid Sold Separately)

The 55 gallon Peabody ProChem Open Top Chemical Tank (Lid Sold Separately) is the same cylindrical open top process tank as the rest of the ProChem open top line, priced for the bare tank: no cover is packed with it. The rim is molded to take Peabody's bolted sheet and shoebox lids in this size, and we quote the one you want alongside the tank — contact us with the tank size and the lid style you need.

Measuring 21.75" diameter x 36" high, this ProChem Open Top Chemical Tank (Lid Sold Separately) holds 55 gallons and opens through a 21.75 in lid.

MATERIAL OPTIONS

• Linear Polyethylene (LPE) 1.5 SG — Part No.: 01-35284 (NSF/ANSI 61 certified resin)
• Linear Polyethylene (LPE) 1.9 SG — Part No.: 01-36555 (NSF/ANSI 61 certified resin)
• Cross-Linked Polyethylene (XLPE) — Part No.: 01-35285 (NSF/ANSI 61 certified resin)
• Polypropylene (PP) — Part No.: 01-36448
• PVDF — Part No.: 01-36449

FEATURES

• Tank only: the price on this page does not include a lid or cover
• Bolted sheet and shoebox lids are built for this mold and quoted on request
• Molded-in calibration on a flat sidewall panel reads the level in gallons and litres
• Molded in LPE 1.5, LPE 1.9, XLPE, polypropylene or polyvinylidene fluoride (PVDF) to suit the chemical stored
• The listed diameter is the shell only and does not include the top rim flange

MATERIAL SELECTION GUIDANCE

Linear polyethylene (LPE) is typically selected for general chemical and water storage; cross-linked polyethylene (XLPE) where greater impact and stress-crack resistance is preferred; polypropylene (PP) and polyvinylidene fluoride (PVDF) for resin-specific chemistries. Choose based on chemical compatibility first: suitability depends on your specific chemical, its concentration and its temperature, and is the buyer's responsibility to verify before ordering. The specific gravity rating states the heaviest liquid the wall is designed to hold — a 1.5 wall up to about 12.5 lb per gallon, a 1.9 wall up to about 16 lb per gallon.

These are vented, atmospheric storage tanks. Not for pressurized or vacuum service.

CHEMICAL COMPATIBILITY RESOURCES

• Peabody Chemical Resistance Chart (PDF)
• Polyethylene Chemical Resistance Chart (PDF)
• Polypropylene Chemical Resistance Chart (PDF)
• Chemical Compatibility Tool

Compatibility data is published by resin and chemical suppliers as general guidance only. Contact us with your chemical, concentration and temperature before you order.

TECHNICAL DRAWINGS & GUIDES

Technical Drawing: View Technical Drawing

KEY SPECIFICATIONS

• Product Type: ProChem Open Top Chemical Tank (Lid Sold Separately)
• Tank Shape: Cylindrical
• Pressurized Use: No
• Capacity: 55 Gallons
• Dimensions: 21.75" diameter x 36" high
• Material: Linear Polyethylene (LPE) 1.5 SG (01-35284)
• Material: Linear Polyethylene (LPE) 1.9 SG (01-36555)
• Material: Cross-Linked Polyethylene (XLPE) (01-35285)
• Material: Polypropylene (PP) (01-36448)
• Material: PVDF (01-36449)
• Color: Natural
• ANSI/NSF 61 Approved Resin: No
• Manufacturer: Peabody Engineering
• Manufacturer Part Number: 01-35284 / 01-36555 / 01-35285 / 01-36448 / 01-36449

SHIPPING INFORMATION

• Freight Class: 250
• Locations: Liberty, South Carolina
• Zip Codes: 29657

WARRANTY TERMS

Peabody Engineering warrants this product against defects in material and workmanship for 36 months from the date of shipment, when it is installed, used and maintained as intended. Chemical compatibility, service temperature and liquid specific gravity are the buyer's responsibility: damage from an incompatible chemical, from service above the rated temperature, or from a liquid heavier than the wall rating is not covered.

Custom and Made to Order products are not returnable