500 Gallon Galvanized Vertical Rainwater Collection Tank | Texas Metal Tanks | TM-MT500G-RW

The Texas Metal Tanks 500 Gallon Galvanized Vertical Rainwater Collection Tank is an above-ground, stationary tank built for rainwater harvesting and non-pressurized water storage. Manufactured from G-90 galvanized steel with a 20 gauge body and bottom, and 22 gauge top. After construction, the interior receives a paint and epoxy lining that is FDA approved for potable water and ANSI/NSF 61 certified. Each tank is factory-tested for watertight performance and backed by a 1-year manufacturer warranty.

Rainwater Collection (RW) configuration: This model is set up for rainwater harvesting. It includes a basket inlet in the top of the tank, a 3-inch or 4-inch overflow, and a 3/4-inch female NPT bulkhead outlet for draw-off.

Key details:

• Material: G-90 Galvanized Steel (US-made), 20 gauge body and bottom, 22 gauge top, riveted assembly
• Interior finish: Paint and epoxy lining, FDA approved for potable water, ANSI/NSF 61 certified
• Configuration: RW (Rainwater Collection). Basket inlet, overflow, and 3/4 inch NPT outlet.
• Fitting type: All fittings are poly bulkhead fittings, not welded metal. Includes basket inlet, 3" or 4" overflow, and 3/4" female NPT outlet for draw-off.
• Dimensions: 4' x 5'8" (48" x 68"), measured to top of sidewall
• Estimated weight: 210 lbs
• Use: Above-ground, stationary, non-pressurized
• Potable water: Yes, suitable for drinking water when installed and used as specified
• Expected service life: 20 to 30 years
• Warranty: 1-year manufacturer warranty
• Packaging: $75 packaging fee for tanks up to 1,000 gallons. For tanks over 1,000 gallons, contact us if palletizing is required.

Model legend: Texas Metal Tanks uses two configuration codes. WS = Water Storage (two poly bulkhead fittings, one lower and one upper). RW = Rainwater Collection (basket inlet, overflow, and 3/4 inch female NPT bulkhead outlet). This product is the RW configuration.

TECHNICAL DRAWINGS & GUIDES

Technical drawings and product guides are available upon request. Contact us to request documents.

KEY SPECIFICATIONS

• Product Type: Vertical Rainwater Collection Tank
• Configuration: RW (Rainwater Collection)
• Material: G-90 Galvanized Steel (US-made)
• Construction: 20 gauge body and bottom, 22 gauge top, riveted assembly
• Interior Finish: Paint and epoxy lining. FDA approved for potable water. ANSI/NSF 61 certified.
• Capacity: 500 Gallons
• Manufacturer Dimensions: 4' x 5'8" (48" x 68"), measured to top of sidewall
• Shipping Dimensions: 50" diameter x 70" height (adds approximately 2 inches on each dimension for packaging). Note: installed fittings may extend 1 to 2 inches beyond these dimensions depending on fitting size and position.
• Estimated Weight (empty): 210 lbs
• Tank Shape: Cylindrical
• Tank Usability: Stationary
• Environment: Above Ground, Atmospheric
• Pressurized Use: No
• Fittings: Basket inlet, 3" or 4" overflow, and 3/4" female NPT bulkhead outlet (all poly bulkhead fittings, not welded metal).
• Potable Water: Yes, suitable for drinking water when installed and used as specified
• Expected Service Life: 20 to 30 years
• Warranty: 1-year manufacturer warranty

MODEL LEGEND

• WS = Water Storage configuration (two poly bulkhead fittings, one lower and one upper)
• RW = Rainwater Collection configuration (basket inlet, overflow, 3/4 inch female NPT bulkhead outlet)

SHIPPING INFORMATION

• Freight Class: 250
• Liftgate Option: Yes
• Ships From: Dripping Springs, Texas (ZIP 78620)
• Packaging Fee: $75 for tanks up to 1,000 gallons. For tanks over 1,000 gallons, contact us if palletizing is required.
• Shipping Dimensions: 50" diameter x 70" height (fittings may add 1 to 2 inches additional clearance)

Custom and Made to Order products are not returnable