Images may be inaccurate. See specs below to ensure accuracy.
Specifications
Size
- Capacity
- 475 gal
- Dimensions
- 48" L x 48" W x 48" H
Build
Ordering
- Brand
- Peabody Engineering
- SKU
- OC372032790651
- Made to order
- Yes
- Estimated lead time
- Ships within 3-4 weeks
Key specs
- Capacity
- 475 gal
- Dimensions
- 48" L x 48" W x 48" H
- Estimated lead time: Ships within 3-4 weeksMade to order, then ships
- Freight to your ZIPEstimate it below or at checkout
All specifications
Size
- Capacity
- 475 gal
- Dimensions
- 48" L x 48" W x 48" H
Build
Ordering
- Brand
- Peabody Engineering
- SKU
- OC372032790651
- Made to order
- Yes
- Estimated lead time
- Ships within 3-4 weeks
Description
The 475 gallon Peabody FRP Open Top Rectangular Tank is a fiberglass reinforced plastic tank for process duty where polyethylene will not do. Ribbed walls and a flanged top rim carry the load, and the laminate is available in polyester or vinylester resin.
Measuring 48" L x 48" W x 48" H, this FRP Open Top Rectangular Tank holds 475 gallons.
MATERIAL OPTIONS
- Polyester — Part No.: 01-33942
- Vinylester — Part No.: 01-33951
FEATURES
- Hand-laid fiberglass construction in polyester or vinylester resin
- Ribbed walls and a flanged top rim, both sized to the tank
- Covers and handles available; sizes beyond the listed range on request
- Vinylester laminate for the more aggressive chemistries
MATERIAL SELECTION GUIDANCE
Linear polyethylene (LPE) is typically selected for general chemical and water storage; cross-linked polyethylene (XLPE) where greater impact and stress-crack resistance is preferred; polypropylene (PPL) and polyvinylidene fluoride (PVDF) for resin-specific chemistries. Choose based on chemical compatibility first: suitability depends on your specific chemical, its concentration and its temperature, and is the buyer's responsibility to verify before ordering. The specific gravity rating states the heaviest liquid the wall is designed to hold — a 1.5 wall up to about 12.5 lb per gallon, a 1.9 wall up to about 16 lb per gallon.
These are vented, atmospheric storage tanks. Not for pressurized or vacuum service.
CHEMICAL COMPATIBILITY RESOURCES
- Peabody Chemical Resistance Chart (PDF)
- Polyethylene Chemical Resistance Chart (PDF)
- Polypropylene Chemical Resistance Chart (PDF)
- Chemical Compatibility Tool
Compatibility data is published by resin and chemical suppliers as general guidance only. Contact us with your chemical, concentration and temperature before you order.
More details
KEY SPECIFICATIONS
- Product Type: FRP Open Top Rectangular Tank
- Tank Shape: Square
- Pressurized Use: No
- Capacity: 475 Gallons
- Dimensions: 48" L x 48" W x 48" H
- Manufacturer: Peabody Engineering
- Manufacturer Part Number: 01-33942 / 01-33951
SHIPPING INFORMATION
- Freight Class: 250
- Locations: Liberty, South Carolina
- Zip Codes: 29657
WARRANTY TERMS
Peabody Engineering warrants this product against defects in material and workmanship for 36 months from the date of shipment, when it is installed, used and maintained as intended. Chemical compatibility, service temperature and liquid specific gravity are the buyer's responsibility: damage from an incompatible chemical, from service above the rated temperature, or from a liquid heavier than the wall rating is not covered.
Custom and Made to Order products are not returnable
Shipping & delivery
- Estimated lead time
- Ships within 3-4 weeks. Lead times are estimates and can change.
- Made to order
- Built after you order, then shipped
- Freight cost
- Enter your ZIP above for an estimate, or see the rates at checkout.
- Questions
- Call (863) 261-8388, Mon–Fri, 8am–5pm EST
Goes with this tank
Not sure this is the right tank?
A tank specialist can check sizing, fittings and delivery to your site. Mon–Fri, 8am–5pm EST.
Why buy from Water Storage Tank
American-owned
Trusted since 2008
Net terms
For business and municipal buyers
Project-managed delivery
Freight coordinated to your site
Real-time support
Mon–Fri, 8am–5pm EST
1515 US 1, Sebastian, FL 32958(863) 261-8388
