400 Gallon Galvanized Vertical Water Storage Tank | Texas Metal Tanks | TM-MT400G-WS

The Texas Metal Tanks 400 Gallon Galvanized Vertical Water Storage Tank is an above-ground, stationary tank built for non-pressurized potable and non-potable water storage. Manufactured from G-90 galvanized steel with a 20 gauge body and bottom, and 22 gauge top. After construction, the interior receives a paint and epoxy lining that is FDA approved for potable water and ANSI/NSF 61 certified. Each tank is factory-tested for watertight performance and backed by a 1-year manufacturer warranty.

Water Storage (WS) configuration: This model is set up for standard water storage. It includes two poly bulkhead fittings on the same side of the tank. One lower fitting sits near the bottom of the sidewall for draw-off, and one upper fitting is positioned higher on the sidewall.

Key details:

• Material: G-90 Galvanized Steel (US-made), 20 gauge body and bottom, 22 gauge top, riveted assembly
• Interior finish: Paint and epoxy lining, FDA approved for potable water, ANSI/NSF 61 certified
• Configuration: WS (Water Storage). Two poly bulkhead fittings (one lower and one upper on the same sidewall).
• Fitting type: All fittings are poly bulkhead fittings, not welded metal. Most tanks 1,000 gallons or less include a 3/4" outlet. 1 1/4" or 2" outlets are available for pressurized systems.
• Dimensions: 3'6" x 5'8" (42" x 68"), measured to top of sidewall
• Estimated weight: 170 lbs
• Use: Above-ground, stationary, non-pressurized
• Potable water: Yes, suitable for drinking water when installed and used as specified
• Expected service life: 20 to 30 years
• Warranty: 1-year manufacturer warranty
• Packaging: $75 packaging fee for tanks up to 1,000 gallons. For tanks over 1,000 gallons, contact us if palletizing is required.

Model legend: Texas Metal Tanks uses two configuration codes. WS = Water Storage (two poly bulkhead fittings, one lower and one upper). RW = Rainwater Collection (basket inlet, overflow, and 3/4 inch female NPT bulkhead outlet). This product is the WS configuration.

TECHNICAL DRAWINGS & GUIDES

Technical drawings and product guides are available upon request. Contact us to request documents.

KEY SPECIFICATIONS

• Product Type: Vertical Water Storage Tank
• Configuration: WS (Water Storage)
• Material: G-90 Galvanized Steel (US-made)
• Construction: 20 gauge body and bottom, 22 gauge top, riveted assembly
• Interior Finish: Paint and epoxy lining. FDA approved for potable water. ANSI/NSF 61 certified.
• Capacity: 400 Gallons
• Manufacturer Dimensions: 3'6" x 5'8" (42" x 68"), measured to top of sidewall
• Shipping Dimensions: 44" diameter x 70" height (adds approximately 2 inches on each dimension for packaging). Note: installed fittings may extend 1 to 2 inches beyond these dimensions depending on fitting size and position.
• Estimated Weight (empty): 170 lbs
• Tank Shape: Cylindrical
• Tank Usability: Stationary
• Environment: Above Ground, Atmospheric
• Pressurized Use: No
• Fittings: Two poly bulkhead fittings, one lower and one upper on the same sidewall (not welded metal). Standard outlet is 3/4" for tanks up to 1,000 gallons. 1 1/4" or 2" outlets available on request.
• Potable Water: Yes, suitable for drinking water when installed and used as specified
• Expected Service Life: 20 to 30 years
• Warranty: 1-year manufacturer warranty

MODEL LEGEND

• WS = Water Storage configuration (two poly bulkhead fittings, one lower and one upper)
• RW = Rainwater Collection configuration (basket inlet, overflow, 3/4 inch female NPT bulkhead outlet)

SHIPPING INFORMATION

• Freight Class: 250
• Liftgate Option: Yes
• Ships From: Dripping Springs, Texas (ZIP 78620)
• Packaging Fee: $75 for tanks up to 1,000 gallons. For tanks over 1,000 gallons, contact us if palletizing is required.
• Shipping Dimensions: 44" diameter x 70" height (fittings may add 1 to 2 inches additional clearance)

Custom and Made to Order products are not returnable