300 Gallon Peabody ProChem Potable Water Tank with Bulkhead Fittings (35 in Dia)

The 300 gallon Peabody ProChem Potable Water Tank with Bulkhead Fittings is molded from virgin FDA resin for drinking water, hydroponics and agricultural service. Every tank is NSF/ANSI/CAN 61 certified by ALS for the safe storage of potable water, and it ships with the bulkhead fittings its size calls for.

Measuring 35" diameter x 78" high, this ProChem Potable Water Tank with Bulkhead Fittings holds 300 gallons and is offered with 8 in and 16 in lids.

MATERIAL OPTIONS

• Linear Polyethylene (LPE) 1.5 SG — Natural / 8 in — Part No.: 01-36266BH (NSF/ANSI 61 certified resin)
• Linear Polyethylene (LPE) 1.5 SG — Natural / 16 in — Part No.: 01-36271BH (NSF/ANSI 61 certified resin)
• Potable Linear Polyethylene (LPE) 1.0 SG — Natural / 8 in — Part No.: 01-36312BH (NSF/ANSI 61 certified resin)
• Potable Linear Polyethylene (LPE) 1.0 SG — Natural / 16 in — Part No.: 01-36316BH (NSF/ANSI 61 certified resin)
• Potable Linear Polyethylene (LPE) 1.0 SG — Black / 8 in — Part No.: 01-36313BH (NSF/ANSI 61 certified resin)
• Potable Linear Polyethylene (LPE) 1.0 SG — Black / 16 in — Part No.: 01-36317BH (NSF/ANSI 61 certified resin)
• Potable Linear Polyethylene (LPE) 1.0 SG — Dk Gray / 8 in — Part No.: 01-36315BH (NSF/ANSI 61 certified resin)
• Potable Linear Polyethylene (LPE) 1.0 SG — Dk Gray / 16 in — Part No.: 01-36319BH (NSF/ANSI 61 certified resin)

FEATURES

• Molded from 100 percent virgin FDA resin in natural, black or green
• NSF/ANSI/CAN 61 certified by ALS Laboratories for potable water
• UV rated for up to 20 years in direct sunlight
• Vented threaded access lid secured to the tank with a lanyard
• One or two bulkhead fittings fitted according to the tank size

Chemical suitability depends on your specific chemical, its concentration and its temperature, and is the buyer's responsibility to verify before ordering. The specific gravity rating states the heaviest liquid the wall is designed to hold — a 1.5 wall up to about 12.5 lb per gallon, a 1.9 wall up to about 16 lb per gallon.

These are vented, atmospheric storage tanks. Not for pressurized or vacuum service.

CHEMICAL COMPATIBILITY RESOURCES

• Peabody Chemical Resistance Chart (PDF)
• Polyethylene Chemical Resistance Chart (PDF)
• Polypropylene Chemical Resistance Chart (PDF)
• Chemical Compatibility Tool

Compatibility data is published by resin and chemical suppliers as general guidance only. Contact us with your chemical, concentration and temperature before you order.

TECHNICAL DRAWINGS & GUIDES

Technical Drawing (Lid: 16 in): View Technical Drawing

Technical Drawing (Lid: 8 in): View Technical Drawing

KEY SPECIFICATIONS

• Product Type: ProChem Potable Water Tank with Bulkhead Fittings
• Tank Shape: Cylindrical
• Pressurized Use: No
• Capacity: 300 Gallons
• Dimensions: 35" diameter x 78" high
• Material: Linear Polyethylene (LPE) 1.5 SG (01-36266BH, 01-36271BH)
• Material: Potable Linear Polyethylene (LPE) 1.0 SG (01-36312BH, 01-36316BH, 01-36313BH, 01-36317BH, 01-36315BH, 01-36319BH)
• Color: Natural, Black, Dk Gray
• ANSI/NSF 61 Approved Resin: Yes
• Manufacturer: Peabody Engineering
• Manufacturer Part Number: 01-36266BH / 01-36271BH / 01-36312BH / 01-36316BH / 01-36313BH / 01-36317BH / 01-36315BH / 01-36319BH

SHIPPING INFORMATION

• Freight Class: 250
• Locations: Liberty, South Carolina
• Zip Codes: 29657

WARRANTY TERMS

Peabody Engineering warrants this product against defects in material and workmanship for 36 months from the date of shipment, when it is installed, used and maintained as intended. Chemical compatibility, service temperature and liquid specific gravity are the buyer's responsibility: damage from an incompatible chemical, from service above the rated temperature, or from a liquid heavier than the wall rating is not covered.

Custom and Made to Order products are not returnable