30 Gallon Peabody ProChem Aquarius Tapered Chemical Feed Tank

The 30 gallon Peabody ProChem Aquarius Tapered Chemical Feed Tank is a tapered chemical feed tank shaped to nest, which cuts what you pay to ship and to store it. A 22 degree mixer mounting surface and a 100 lb rated pump pad with a recessed collection reservoir are molded in, so it drops straight into a water treatment feed system.

Measuring 27" diameter x 21.5" high, this ProChem Aquarius Tapered Chemical Feed Tank holds 30 gallons.

MATERIAL OPTIONS

• LPE 1.25 / Natural — Part No.: 01-34849 (NSF/ANSI 61 certified resin)
• LPE 1.25 / Blue — Part No.: 01-35133 (NSF/ANSI 61 certified resin)
• LPE 1.25 / Black — Part No.: 01-35135 (NSF/ANSI 61 certified resin)
• LPE 1.25 / Yellow — Part No.: 01-35134 (NSF/ANSI 61 certified resin)
• LPE 1.5 / Natural — Part No.: 01-28641 (NSF/ANSI 61 certified resin)
• LPE 1.5 / Blue — Part No.: 01-28643 (NSF/ANSI 61 certified resin)
• LPE 1.5 / Black — Part No.: 01-28644 (NSF/ANSI 61 certified resin)
• LPE 1.5 / Yellow — Part No.: 01-28642 (NSF/ANSI 61 certified resin)
• LPE 1.9 / Natural — Part No.: 01-28645 (NSF/ANSI 61 certified resin)
• LPE 1.9 / Blue — Part No.: 01-28647 (NSF/ANSI 61 certified resin)
• LPE 1.9 / Black — Part No.: 01-28648 (NSF/ANSI 61 certified resin)
• LPE 1.9 / Yellow — Part No.: 01-28646 (NSF/ANSI 61 certified resin)

FEATURES

• Tapered, nestable shape lowers freight and storage cost
• 22 degree mixer mounting surface molded into the top
• 100 lb rated pump surface with a recessed collection reservoir
• 4 inch inspection port and two 2 inch FNPT fittings
• Standard LPE tanks are NSF/ANSI/CAN 61 certified; XLPE, PPL and polyvinylidene fluoride (PVDF) on request

MATERIAL SELECTION GUIDANCE

Linear polyethylene (LPE) is typically selected for general chemical and water storage; cross-linked polyethylene (XLPE) where greater impact and stress-crack resistance is preferred; polypropylene (PPL) and polyvinylidene fluoride (PVDF) for resin-specific chemistries. Choose based on chemical compatibility first: suitability depends on your specific chemical, its concentration and its temperature, and is the buyer's responsibility to verify before ordering. The specific gravity rating states the heaviest liquid the wall is designed to hold — a 1.5 wall up to about 12.5 lb per gallon, a 1.9 wall up to about 16 lb per gallon.

These are vented, atmospheric storage tanks. Not for pressurized or vacuum service.

CHEMICAL COMPATIBILITY RESOURCES

• Peabody Chemical Resistance Chart (PDF)
• Polyethylene Chemical Resistance Chart (PDF)
• Polypropylene Chemical Resistance Chart (PDF)
• Chemical Compatibility Tool

Compatibility data is published by resin and chemical suppliers as general guidance only. Contact us with your chemical, concentration and temperature before you order.

TECHNICAL DRAWINGS & GUIDES

Technical Drawing: View Technical Drawing

KEY SPECIFICATIONS

• Product Type: ProChem Aquarius Tapered Chemical Feed Tank
• Tank Shape: Cylindrical
• Pressurized Use: No
• Capacity: 30 Gallons
• Dimensions: 27" diameter x 21.5" high
• Material: LPE 1.25 (01-34849, 01-35133, 01-35135, 01-35134)
• Material: LPE 1.5 (01-28641, 01-28643, 01-28644, 01-28642)
• Material: LPE 1.9 (01-28645, 01-28647, 01-28648, 01-28646)
• Color: Natural, Blue, Black, Yellow
• ANSI/NSF 61 Approved Resin: Yes
• Manufacturer: Peabody Engineering
• Manufacturer Part Number: 01-34849 / 01-35133 / 01-35135 / 01-35134 / 01-28641 / 01-28643 / 01-28644 / 01-28642 / 01-28645 / 01-28647 / 01-28648 / 01-28646

SHIPPING INFORMATION

• Freight Class: 250
• Locations: Liberty, South Carolina
• Zip Codes: 29657

WARRANTY TERMS

Peabody Engineering warrants this product against defects in material and workmanship for 36 months from the date of shipment, when it is installed, used and maintained as intended. Chemical compatibility, service temperature and liquid specific gravity are the buyer's responsibility: damage from an incompatible chemical, from service above the rated temperature, or from a liquid heavier than the wall rating is not covered.

Custom and Made to Order products are not returnable