2750 Gallon Peabody ProChem Open Top Tank

The 2750 gallon Peabody ProChem Open Top Tank is a cylindrical open-top tank supplied with a dust-cover lid, sized for batching, mixing and day-tank service. A flat calibrated panel on the sidewall reads the level in gallons and litres, and the whole interior is reachable the moment the cover comes off.

Measuring 102" diameter x 82" high, this ProChem Open Top Tank holds 2750 gallons.

MATERIAL OPTIONS

• Linear Polyethylene (LPE) 1.5 SG — Part No.: 01-35837 (NSF/ANSI 61 certified resin)
• Linear Polyethylene (LPE) 1.9 SG — Part No.: 01-35838 (NSF/ANSI 61 certified resin)
• Cross-Linked Polyethylene (XLPE) 1.5 SG — Part No.: 01-35839 (NSF/ANSI 61 certified resin)
• Cross-Linked Polyethylene (XLPE) 1.9 SG — Part No.: 01-35840 (NSF/ANSI 61 certified resin)

FEATURES

• Dust cover style lid included; the listed height runs from the floor to the top of the lid
• Flat sidewall panel with molded-in calibration in gallons and litres; blackened-in numbering optional
• Translucent natural is standard, with Gemini blue and black available to order
• LPE tanks are NSF/ANSI/CAN 61 certified in every size; XLPE from 55 to 500 gallons
• The listed diameter is the shell only and does not include the top rim flange

MATERIAL SELECTION GUIDANCE

Linear polyethylene (LPE) is typically selected for general chemical and water storage; cross-linked polyethylene (XLPE) where greater impact and stress-crack resistance is preferred; polypropylene (PP) and polyvinylidene fluoride (PVDF) for resin-specific chemistries. Choose based on chemical compatibility first: suitability depends on your specific chemical, its concentration and its temperature, and is the buyer's responsibility to verify before ordering. The specific gravity rating states the heaviest liquid the wall is designed to hold — a 1.5 wall up to about 12.5 lb per gallon, a 1.9 wall up to about 16 lb per gallon.

These are vented, atmospheric storage tanks. Not for pressurized or vacuum service.

CHEMICAL COMPATIBILITY RESOURCES

• Peabody Chemical Resistance Chart (PDF)
• Polyethylene Chemical Resistance Chart (PDF)
• Polypropylene Chemical Resistance Chart (PDF)
• Chemical Compatibility Tool

Compatibility data is published by resin and chemical suppliers as general guidance only. Contact us with your chemical, concentration and temperature before you order.

TECHNICAL DRAWINGS & GUIDES

Technical Drawing: View Technical Drawing

KEY SPECIFICATIONS

• Product Type: ProChem Open Top Tank
• Tank Shape: Cylindrical
• Pressurized Use: No
• Capacity: 2750 Gallons
• Dimensions: 102" diameter x 82" high
• Material: Linear Polyethylene (LPE) 1.5 SG (01-35837)
• Material: Linear Polyethylene (LPE) 1.9 SG (01-35838)
• Material: Cross-Linked Polyethylene (XLPE) 1.5 SG (01-35839)
• Material: Cross-Linked Polyethylene (XLPE) 1.9 SG (01-35840)
• Color: Natural
• ANSI/NSF 61 Approved Resin: Yes
• Manufacturer: Peabody Engineering
• Manufacturer Part Number: 01-35837 / 01-35838 / 01-35839 / 01-35840

SHIPPING INFORMATION

• Freight Class: 250
• Locations: Liberty, South Carolina
• Zip Codes: 29657

WARRANTY TERMS

Peabody Engineering warrants this product against defects in material and workmanship for 36 months from the date of shipment, when it is installed, used and maintained as intended. Chemical compatibility, service temperature and liquid specific gravity are the buyer's responsibility: damage from an incompatible chemical, from service above the rated temperature, or from a liquid heavier than the wall rating is not covered.

Custom and Made to Order products are not returnable