1300 Gallon Peabody Gemini PLUS Dual Containment Tank

The Peabody Gemini PLUS Dual Containment Tank is the large end of the Gemini double-wall line, built from the start to be customised. The base tank carries a 16 inch vented threaded manway, heavy-duty D-ring lifting lugs and mounting provisions for ladders, truck fill lines, discharge assemblies, level and leak detection and seismic restraint.

Measuring 84" diameter x 82.5" high, this Gemini PLUS Dual Containment Tank holds 1300 gallons.

MATERIAL OPTIONS

• LPE 1.5 — Part No.: 01-33363 (NSF/ANSI 61 certified resin)
• LPE 1.9 — Part No.: 01-33364 (NSF/ANSI 61 certified resin)
• XLPE 1.5 — Part No.: 01-33366 (NSF/ANSI 61 certified resin)
• XLPE 1.9 — Part No.: 01-33367 (NSF/ANSI 61 certified resin)

FEATURES

• 16 inch outside diameter threaded and vented access manway
• Heavy-duty D-ring lifting lugs molded into the tank
• Provisions for ladders, truck fill lines, top or bottom discharge, level and leak detection and seismic restraint
• Available ASTM D-1998 rated, in LPE, XLPE, polypropylene or polyvinylidene fluoride (PVDF)
• Can be pre-fitted at the factory or retro-fitted in the field

MATERIAL SELECTION GUIDANCE

Linear polyethylene (LPE) is typically selected for general chemical and water storage; cross-linked polyethylene (XLPE) where greater impact and stress-crack resistance is preferred; polypropylene (PPL) and polyvinylidene fluoride (PVDF) for resin-specific chemistries. Choose based on chemical compatibility first: suitability depends on your specific chemical, its concentration and its temperature, and is the buyer's responsibility to verify before ordering. The specific gravity rating states the heaviest liquid the wall is designed to hold — a 1.5 wall up to about 12.5 lb per gallon, a 1.9 wall up to about 16 lb per gallon.

These are vented, atmospheric storage tanks. Not for pressurized or vacuum service.

CHEMICAL COMPATIBILITY RESOURCES

• Peabody Chemical Resistance Chart (PDF)
• Polyethylene Chemical Resistance Chart (PDF)
• Polypropylene Chemical Resistance Chart (PDF)
• Chemical Compatibility Tool

Compatibility data is published by resin and chemical suppliers as general guidance only. Contact us with your chemical, concentration and temperature before you order.

KEY SPECIFICATIONS

• Product Type: Gemini PLUS Dual Containment Tank
• Tank Shape: Cylindrical
• Pressurized Use: No
• Capacity: 1300 Gallons
• Dimensions: 84" diameter x 82.5" high
• Material: LPE 1.5 (01-33363)
• Material: LPE 1.9 (01-33364)
• Material: XLPE 1.5 (01-33366)
• Material: XLPE 1.9 (01-33367)
• Color: Natural
• ANSI/NSF 61 Approved Resin: Yes
• Manufacturer: Peabody Engineering
• Manufacturer Part Number: 01-33363 / 01-33364 / 01-33366 / 01-33367

SHIPPING INFORMATION

• Freight Class: 250
• Locations: Liberty, South Carolina
• Zip Codes: 29657

WARRANTY TERMS

Peabody Engineering warrants this product against defects in material and workmanship for 36 months from the date of shipment, when it is installed, used and maintained as intended. Chemical compatibility, service temperature and liquid specific gravity are the buyer's responsibility: damage from an incompatible chemical, from service above the rated temperature, or from a liquid heavier than the wall rating is not covered.

Custom and Made to Order products are not returnable