1000 Gallon Peabody ProChem Process Chemical Tank (64 in Dia)

The 1000 gallon Peabody ProChem Process Chemical Tank is a single-wall polyethylene tank built for day-tank duty in chemical feed, water treatment and agricultural systems. It arrives with a vented access lid, molded-in calibration in gallons and litres, and a molded pump platform on top so a metering pump can sit directly over the tank. Pick the resin and wall rating that matches your chemical.

Measuring 64" diameter x 82" high, this ProChem Process Chemical Tank holds 1000 gallons and opens through a 16 in lid.

MATERIAL OPTIONS

• Linear Polyethylene (LPE) 1.5 SG — Part No.: 01-35272 (NSF/ANSI 61 certified resin)
• Linear Polyethylene (LPE) 1.9 SG — Part No.: 01-35273 (NSF/ANSI 61 certified resin)
• Cross-Linked Polyethylene (XLPE) 1.5 SG — Part No.: 01-35684 (NSF/ANSI 61 certified resin)
• Cross-Linked Polyethylene (XLPE) 1.9 SG — Part No.: 01-35274 (NSF/ANSI 61 certified resin)

Value-Pak packages are offered with the natural-color Linear Polyethylene (LPE) 1.5 SG and 1.9 SG tanks.

WHAT EACH PACKAGE INCLUDES

Silver — Part No.: 293-35587

• ProChem tank with a vented twist lid, drain and fill connections and a 2" electronic level connection
• PVC/EPDM bulkhead fittings, 2" standard size
• PVC/EPDM threaded ball valve as the shut-off
• CAD submittal drawings
• Shipping prep to protect the tank in transit

Gold — Part No.: 293-35588

Everything in Silver except the PVC/EPDM bulkhead fittings, plus:

• Welded polyethylene couplings in place of the bulkhead fittings, threaded or flanged, 2" standard size
• PVC/EPDM truck fill connection mounted on the tank sidewall at 42 in high, with a PVC/EPDM ball valve, check valve, PVC drop line, polypropylene quick coupler, cap and lanyard
• Lifting lugs

Platinum — Part No.: 293-35589

Everything in Gold, plus:

• Mini inverse level gauge
• OSHA-compliant, corrosion-resistant fiberglass access ladder with its mounting hardware

FEATURES

• Integrally molded pump mounting platform on top, rated for pumps up to 225 lb on sizes through 300 gallons
• Vented threaded access lid with molded-in calibration in both gallons and litres
• Standard top process fittings for fill, discharge and level sensing on 300 gallon and smaller tanks
• Available in 1.5 or 1.9 specific gravity walls, in LPE, XLPE, polypropylene or polyvinylidene fluoride (PVDF)
• LPE tanks are NSF/ANSI/CAN 61 certified for potable water; XLPE is certified from 40 gallons up
• Seismic and wind restraint, agitation and process connection options available

MATERIAL SELECTION GUIDANCE

Linear polyethylene (LPE) is typically selected for general chemical and water storage; cross-linked polyethylene (XLPE) where greater impact and stress-crack resistance is preferred; polypropylene (PP) and polyvinylidene fluoride (PVDF) for resin-specific chemistries. Choose based on chemical compatibility first: suitability depends on your specific chemical, its concentration and its temperature, and is the buyer's responsibility to verify before ordering. The specific gravity rating states the heaviest liquid the wall is designed to hold — a 1.5 wall up to about 12.5 lb per gallon, a 1.9 wall up to about 16 lb per gallon.

These are vented, atmospheric storage tanks. Not for pressurized or vacuum service.

CHEMICAL COMPATIBILITY RESOURCES

• Peabody Chemical Resistance Chart (PDF)
• Polyethylene Chemical Resistance Chart (PDF)
• Polypropylene Chemical Resistance Chart (PDF)
• Chemical Compatibility Tool

Compatibility data is published by resin and chemical suppliers as general guidance only. Contact us with your chemical, concentration and temperature before you order.

TECHNICAL DRAWINGS & GUIDES

Technical Drawing: View Technical Drawing

KEY SPECIFICATIONS

• Product Type: ProChem Process Chemical Tank
• Tank Shape: Cylindrical
• Pressurized Use: No
• Capacity: 1000 Gallons
• Dimensions: 64" diameter x 82" high
• Material: Linear Polyethylene (LPE) 1.5 SG (01-35272)
• Material: Linear Polyethylene (LPE) 1.9 SG (01-35273)
• Material: Cross-Linked Polyethylene (XLPE) 1.5 SG (01-35684)
• Material: Cross-Linked Polyethylene (XLPE) 1.9 SG (01-35274)
• Value-Pak Silver: 293-35587
• Value-Pak Gold: 293-35588
• Value-Pak Platinum: 293-35589
• Color: Natural
• ANSI/NSF 61 Approved Resin: Yes
• Manufacturer: Peabody Engineering
• Manufacturer Part Number: 01-35272 / 01-35273 / 01-35684 / 01-35274

SHIPPING INFORMATION

• Freight Class: 250
• Locations: Liberty, South Carolina
• Zip Codes: 29657

WARRANTY TERMS

Peabody Engineering warrants this product against defects in material and workmanship for 36 months from the date of shipment, when it is installed, used and maintained as intended. Chemical compatibility, service temperature and liquid specific gravity are the buyer's responsibility: damage from an incompatible chemical, from service above the rated temperature, or from a liquid heavier than the wall rating is not covered.

Custom and Made to Order products are not returnable