Product Description
90 Gallon Marine & RV Tank | Holding & Fresh Water | Trionic WH-2090
The 90 Gallon Trionic Marine & RV Tank (Holding & Fresh Water) | WH-2090 is built for larger-capacity installations in boats, RVs, trailers, and other mobile applications where a rugged, rotationally molded tank is required. This rectangular polyethylene tank supports fresh/potable water storage as well as wastewater holding (grey/black water) in non-pressurized setups, and at 67" L × 21" W × 15" H it provides high capacity while remaining practical for under-deck or undercarriage placement.
The WH-2090 is typically offered as a pre-drilled configuration with (2) 1-1/2" FPT and (2) 1/2" FPT female NPT threaded openings located on one end (unused openings can be capped), and it is also commonly available as a blank version (B-2090) without openings for custom fitting placement and routing as needed (often paired with a DIY CF-60 custom fittings kit). The tank is manufactured as a seamless, one-piece unit with an approximate 3/8" average wall thickness, should be installed with the bottom fully supported, and is intended for storage-only use (not designed to be pressurized).
FEATURES
-
Product Type: Marine & RV Tank (Holding & Fresh Water)
-
Model: Trionic WH-2090
-
Capacity: 90 Gallon
-
Tank Shape: Rectangular
-
Usability: Portable
-
Environment: Above Ground
-
Pressurized Use: No
-
ANSI / NSF 61 Approved Resin: Yes
-
Dimensions: 67" Length × 21" Width × 15" Height
-
Material / Color: Polyethylene, Natural White
Other Details
KEY SPECIFICATIONS
- Product Type: Marine & RV Tank (Holding & Fresh Water)
- Model: Trionic WH-2090
- Capacity: 90 Gallon
- Tank Shape: Rectangular
- Usability: Portable
- Environment: Above Ground
- Pressurized Use: No
- Dimensions: 67" Length × 21" Width × 15" Height
- Material: Polyethylene
- Color: Natural White
- ANSI / NSF 61 Approved Resin: Yes
- Marine Reference: Meets U.S. Coast Guard regulations (as applicable)
- Pre-Drilled Configuration (WH-2090) Openings: (2) 1-1/2" FPT and (2) 1/2" FPT threaded openings (located on one end)
- Blank Configuration: Blank Tank (B-2090) available without openings for custom fitting placement
- Thread Type: Female NPT (National Pipe Thread)
- Wall Thickness: 3/8" average
- Compatible Accessory: DIY CF-60 Custom Fittings Kit (for custom fitting placement/blank-tank applications)
- Warranty: 3-year (manufacturer)
COMPLIANCE REFERENCES
- NSF/ANSI 61 – Drinking Water System Components (Health Effects)
- FDA – 21 CFR § 177.1520 (Olefin Polymers; Polyethylene Resin Reference)
- USCG – 33 CFR Part 159 (Marine Sanitation Devices)
- NFPA 1192 – Standard on Recreational Vehicles
SHIPPING INFORMATION
- Freight Class: 300
- Liftgate Option: Yes
- Locations: Wisconsin
- Zip Codes: 53021