Product Description
80 Gallon Marine & RV Tank | Holding & Fresh Water | Trionic WH-2080
The 80 Gallon Trionic Marine & RV Tank (Holding & Fresh Water) | WH-2080 is designed for boats, RVs, and other mobile or space-conscious installations where a durable, space-efficient tank is required. This rectangular polyethylene tank supports potable/fresh water storage as well as wastewater holding (including grey and black water) in non-pressurized setups. With a footprint of 30" L × 27" W × 24" H, the WH-2080 provides substantial capacity while remaining practical to place and secure.
The WH-2080 is manufactured as a seamless, one-piece rotationally molded tank. It is available in two configurations: a Pre-Drilled option that includes (2) 1-1/2" FPT and (2) 1/2" FPT female NPT threaded openings on one end (unused openings can be capped), and a Blank (undrilled) option for custom fitting placement. For blank-tank installations, the CF-60 Custom Fittings Kit is the standard accessory path for common fitting components and installation guidance. Trionic notes an approximate 3/8" average wall thickness and recommends installing with the bottom fully supported and using a minimum 12" flexible hose section to hose barb fittings.
FEATURES
-
Product Type: Marine & RV Tank (Holding & Fresh Water)
-
Model: Trionic WH-2080
-
Capacity: 80 Gallon
-
Tank Shape: Rectangular
-
Usability: Portable
-
Environment: Above Ground
-
Pressurized Use: No
-
ANSI / NSF 61 Approved Resin: Yes
-
Dimensions: 30" Length × 27" Width × 24" Height
-
Material / Color: Polyethylene, Natural White
Other Details
KEY SPECIFICATIONS
- Product Type: Marine & RV Tank (Holding & Fresh Water)
- Model: Trionic WH-2080
- Capacity: 80 Gallon
- Tank Shape: Rectangular
- Usability: Portable
- Environment: Above Ground
- Pressurized Use: No
- Dimensions: 30" Length × 27" Width × 24" Height
- Material: Polyethylene
- Color: Natural White
- ANSI / NSF 61 Approved Resin: Yes
- Marine Reference: Meets U.S. Coast Guard regulations (as applicable)
- Openings (Pre-Drilled Option): (2) 1-1/2" FPT and (2) 1/2" FPT threaded openings (located on one end; unused openings can be capped)
- Openings (Blank Option): No openings / undrilled (intended for custom fitting placement)
- Thread Type: Female NPT (National Pipe Thread)
- Wall Thickness: 3/8" average
- Installation Note: Bottom should be fully supported; use a minimum 12" flexible hose section to hose barb fittings
- Compatible Accessory: CF-60 Custom Fittings Kit (for custom fitting placement / blank-tank applications)
- Warranty: 1-year (materials and workmanship)
COMPLIANCE REFERENCES
- NSF/ANSI 61 – Drinking Water System Components (Health Effects)
- FDA – 21 CFR § 177.1520 (Olefin Polymers; Polyethylene Resin Reference)
- USCG – 33 CFR Part 159 (Marine Sanitation Devices)
- NFPA 1192 – Standard on Recreational Vehicles
SHIPPING INFORMATION
- Freight Class: 300
- Liftgate Option: Yes
- Locations: Wisconsin
- Zip Codes: 53021
