Product Description
70 Gallon Marine & RV Tank | Holding & Fresh Water | Trionic WH-2070-1
The 70 Gallon Trionic Marine & RV Tank (Holding & Fresh Water) | WH-2070-1 is designed for boats, RVs, and other mobile installations where a durable, space-efficient tank is required. This rectangular polyethylene tank is suitable for potable/fresh water storage as well as wastewater holding (including grey and black water) in non-pressurized setups. With an overall size of 51" L × 23" W × 15" H, the WH-2070-1 provides strong capacity while remaining practical to install in tight compartments. Trionic tanks are seamless, one-piece, rotationally molded and manufactured to comply with FDA 21 CFR 177.1520 and meet U.S. Coast Guard regulations (as applicable).
This model is available in both pre-drilled and blank configurations; the pre-drilled version includes (2) 1-1/2" FPT and (2) 1/2" FPT female NPT threaded openings located on one end (unused openings can be capped), while the blank option supports custom fitting placement and is commonly paired with the Trionic CF-60 Custom Fittings Kit. The tank features an approximate 3/8" average wall thickness and should be installed with the bottom fully supported; Trionic also recommends using a minimum 12" flexible hose section to hose barb fittings for installation.
Features
-
Product Type: Marine & RV Tank (Holding & Fresh Water)
-
Model: Trionic WH-2070-1
-
Capacity: 70 Gallon
-
Tank Shape: Rectangular
-
Usability: Portable
-
Environment: Above Ground
-
Pressurized Use: No
-
ANSI / NSF 61 Approved Resin: Yes
-
Dimensions: 51" Length × 23" Width × 15" Height
-
Material / Color: Polyethylene, Natural White
Other Details
KEY SPECIFICATIONS
- Product Type: Marine & RV Tank (Holding & Fresh Water)
- Model: Trionic WH-2070-1
- Capacity: 70 Gallon
- Tank Shape: Rectangular
- Usability: Portable
- Environment: Above Ground
- Pressurized Use: No
- Dimensions: 51" Length × 23" Width × 15" Height
- Material: Polyethylene
- Color: Natural White
- ANSI / NSF 61 Approved Resin: Yes
- Marine Reference: Meets U.S. Coast Guard regulations (as applicable)
- Pre-Drilled Openings: (2) 1-1/2" FPT and (2) 1/2" FPT threaded openings (located on one end)
- Blank Option: Available without openings for custom fitting placement
- Thread Type: Female NPT (National Pipe Thread)
- Wall Thickness: 3/8" average
- Compatible Accessory: Trionic CF-60 Custom Fittings Kit (recommended for blank-tank/custom fitting placement)
- Installation Note: Bottom must be fully supported; use a minimum 12" flexible hose section to hose barb fittings
- Warranty: 1-year (materials and workmanship)
COMPLIANCE REFERENCES
- NSF/ANSI 61 – Drinking Water System Components (Health Effects)
- FDA – 21 CFR § 177.1520 (Olefin Polymers; Polyethylene Resin Reference)
- USCG – 33 CFR Part 159 (Marine Sanitation Devices)
- NFPA 1192 – Standard on Recreational Vehicles
SHIPPING INFORMATION
- Freight Class: 300
- Liftgate Option: Yes
- Locations: Wisconsin
- Zip Codes: 53021
