Product Description
50 Gallon Marine & RV Tank | Holding & Fresh Water | Trionic WH-2050
The 50 Gallon Trionic Marine & RV Tank (Holding & Fresh Water) | WH-2050 is designed for boats, RVs, and other mobile applications where a durable, space-efficient tank is required. This rectangular polyethylene tank supports fresh/potable water storage as well as wastewater holding (including grey and black water) in non-pressurized setups.
With a footprint of 37" L × 29" W × 11.75" H, the WH-2050 balances practical capacity with flexible placement. The tank is manufactured as a seamless, one-piece rotationally molded tank with an approximate 3/8" average wall thickness and should be installed with the bottom fully supported; Trionic also recommends using a minimum 12" flexible hose section to hose barb fittings for installation.
Pre-drilled vs blank configuration: The standard WH (Water/Holding) configuration is pre-drilled with (2) 1-1/2" FPT and (2) 1/2" FPT female NPT threaded openings located on one end (unused openings can be capped). If your application requires custom fitting placement, the blank tank option (B-2050) ships without openings, allowing you to locate fittings as needed—typically using Trionic’s CF-60 / DIY custom fittings kit guidance.
FEATURES
-
Product Type: Marine & RV Tank (Holding & Fresh Water)
-
Model: Trionic WH-2050
-
Capacity: 50 Gallon
-
Tank Shape: Rectangular
-
Usability: Portable
-
Environment: Above Ground
-
Pressurized Use: No
-
ANSI / NSF 61 Approved Resin: Yes
-
Dimensions: 37" Length × 29" Width × 11.75" Height
-
Material / Color: Polyethylene, Natural White
Other Details
KEY SPECIFICATIONS
- Product Type: Marine & RV Tank (Holding & Fresh Water)
- Model: Trionic WH-2050
- Capacity: 50 Gallon
- Tank Shape: Rectangular
- Usability: Portable
- Environment: Above Ground
- Pressurized Use: No
- Dimensions: 37" Length × 29" Width × 11.75" Height
- Material: Polyethylene
- Color: Natural White
- ANSI / NSF 61 Approved Resin: Yes
- FDA Resin Reference: Complies with FDA 21 CFR § 177.1520 (polyethylene resin reference)
- Marine Reference: Meets U.S. Coast Guard regulations (as applicable)
- Pre-Drilled Configuration (WH): Includes (2) 1-1/2" FPT and (2) 1/2" FPT female NPT threaded openings (located on one end); unused openings can be capped.
- Blank Configuration (B): B-2050 option ships without openings for custom fitting placement.
- Thread Type: Female NPT (National Pipe Thread)
- Wall Thickness: 3/8" average
- Compatible Accessory: DIY / CF-60 Custom Fittings Kit (for custom fitting placement/blank-tank applications)
- Warranty: 1-year (materials and workmanship)
COMPLIANCE REFERENCES
- NSF/ANSI 61 – Drinking Water System Components (Health Effects)
- FDA – 21 CFR § 177.1520 (Olefin Polymers; Polyethylene Resin Reference)
- USCG – 33 CFR Part 159 (Marine Sanitation Devices)
- NFPA 1192 – Standard on Recreational Vehicles
SHIPPING INFORMATION
- Freight Class: 300
- Liftgate Option: Yes
- Locations: Wisconsin
- Zip Codes: 53021
