Product Description
20 Gallon Marine & RV Tank | Holding & Fresh Water | Trionic WH-2020
The 20 Gallon Trionic Marine & RV Tank (Holding & Fresh Water) | WH-2020 is designed for compact installations in boats, RVs, and other mobile applications where a durable, space-efficient tank is required. This rectangular polyethylene tank supports potable/fresh water storage as well as wastewater holding (including grey and black water) in non-pressurized setups. With a footprint of 24" L × 16" W × 12" H, the WH-2020 balances practical capacity with flexible placement.
This tank is available in two configurations. The Pre-Drilled version includes factory threaded openings located on one end: (2) 1-1/2" FPT and (2) 1/2" FPT female NPT openings (unused openings can be capped). The Blank version ships without openings, allowing custom fitting placement for unique plumbing layouts; for blank-tank applications, the DIY CF-60 Custom Fittings Kit is the recommended accessory for fitting selection and installation guidance.
Trionic tanks are manufactured as seamless, one-piece rotationally molded polyethylene units with approximately 3/8" average wall thickness. For installation, the bottom of the tank should be fully supported, and Trionic recommends using a minimum 12" flexible hose section to hose barb fittings.
FEATURES
- Product Type: Marine & RV Tank (Holding & Fresh Water)
- Model: Trionic WH-2020
- Capacity: 20 Gallon
- Tank Shape: Rectangular
- Usability: Portable
- Environment: Above Ground
- Pressurized Use: No
- ANSI / NSF 61 Approved Resin: Yes
- Dimensions: 24" Length × 16" Width × 12" Height
- Material / Color: Polyethylene, Natural White
Other Details
KEY SPECIFICATIONS
- Product Type: Marine & RV Tank (Holding & Fresh Water)
- Model: Trionic WH-2020
- Capacity: 20 Gallon
- Tank Shape: Rectangular
- Usability: Portable
- Environment: Above Ground
- Pressurized Use: No
- Dimensions: 24" Length × 16" Width × 12" Height
- Material: Polyethylene
- Color: Natural White
- ANSI / NSF 61 Approved Resin: Yes
- Marine Reference: Meets U.S. Coast Guard regulations (as applicable)
- Pre-Drilled Openings: (2) 1-1/2" FPT and (2) 1/2" FPT threaded openings (located on one end)
- Blank Configuration: No openings (for custom fitting placement)
- Thread Type: Female NPT (National Pipe Thread)
- Wall Thickness: 3/8" average
- Compatible Accessory: DIY CF-60 Custom Fittings Kit (for custom fitting placement/blank-tank applications)
- Warranty: 1-year (materials and workmanship)
COMPLIANCE REFERENCES
- NSF/ANSI 61 – Drinking Water System Components (Health Effects)
- FDA – 21 CFR § 177.1520 (Olefin Polymers; Polyethylene Resin Reference)
- USCG – 33 CFR Part 159 (Marine Sanitation Devices)
- NFPA 1192 – Standard on Recreational Vehicles
SHIPPING INFORMATION
- Freight Class: 125
- Liftgate Option: Yes
- Locations: Wisconsin
- Zip Codes: 53021
