Product Description
100 Gallon Marine & RV Tank | Holding & Fresh Water | Trionic WH-2100
The 100 Gallon Trionic Marine & RV Tank (Holding & Fresh Water) | WH-2100 is designed for boats, RVs, and other mobile applications where a durable, space-efficient tank is required for fresh/potable water storage as well as wastewater holding (including grey and black water) in non-pressurized setups. With an overall footprint of 46" L × 26" W × 20" H, the WH-2100 provides substantial capacity while still supporting flexible placement.
Trionic tanks are manufactured as a seamless, one-piece rotationally molded polyethylene tank with an approximate 3/8" average wall thickness. The standard WH-series configuration is pre-drilled and includes (2) 1-1/2" FPT and (2) 1/2" FPT female NPT threaded openings located on one end (unused openings can be capped). Blank (B-series) versions ship without openings or fittings to support custom routing and fitting placement; for these applications, the DIY CF-60 Custom Fittings Kit provides common fitting components and installation guidance. The tank should be installed with the bottom fully supported, and Trionic recommends using a minimum 12" flexible hose section to hose barb fittings during installation.
Features
-
Product Type: Marine & RV Tank (Holding & Fresh Water)
-
Model: Trionic WH-2100
-
Capacity: 100 Gallon
-
Tank Shape: Rectangular
-
Usability: Portable
-
Environment: Above Ground
-
Pressurized Use: No
-
ANSI / NSF 61 Approved Resin: Yes
-
Dimensions: 46" Length × 26" Width × 20" Height
-
Material / Color: Polyethylene, Natural White
Other Details
KEY SPECIFICATIONS
- Product Type: Marine & RV Tank (Holding & Fresh Water)
- Model: Trionic WH-2100
- Capacity: 100 Gallon
- Tank Shape: Rectangular
- Usability: Portable
- Environment: Above Ground
- Pressurized Use: No
- Dimensions: 46" Length × 26" Width × 20" Height
- Material: Polyethylene
- Color: Natural White
- ANSI / NSF 61 Approved Resin: Yes
- Marine Reference: Meets U.S. Coast Guard regulations (as applicable)
- Standard Configuration (Pre-Drilled): WH-series tanks include factory threaded openings
- Blank Configuration: B-series tanks ship without openings/fittings for custom placement
- Openings (Pre-Drilled WH-Series): (2) 1-1/2" FPT and (2) 1/2" FPT female NPT threaded openings (located on one end; unused openings can be capped)
- Thread Type: Female NPT (National Pipe Thread)
- Wall Thickness: 3/8" average (± 1/16")
- Compatible Accessory: DIY CF-60 Custom Fittings Kit (for custom fitting placement/blank-tank applications)
- Installation Notes: Bottom should be fully supported; Trionic recommends using a minimum 12" flexible hose section to hose barb fittings
- Warranty: 3-year (manufacturer)
COMPLIANCE REFERENCES
- NSF/ANSI 61 – Drinking Water System Components (Health Effects)
- FDA – 21 CFR § 177.1520 (Olefin Polymers; Polyethylene Resin Reference)
- USCG – 33 CFR Part 159 (Marine Sanitation Devices)
- NFPA 1192 – Standard on Recreational Vehicles
SHIPPING INFORMATION
- Freight Class: 250
- Liftgate Option: Yes
- Locations: Wisconsin
- Zip Codes: 53021
